Environmental

Waters ERA can help you get ahead of the curve on the newly restructured Stationary Source Audit Sample (SSAS) program.

Beginning June 16, 2013, creation and distribution of audit samples will transition to a private accredited source rather than the EPA; previously the EPA provided audit samples for emissions testing to state and local agencies. Obtaining audit samples will be the responsibility of the source owner or an authorized testing representative or firm.

Let Waters ERA get you familiarized with audit sample program by watching the webinar below.


WEBINAR:
Stationary Source Audit Sample Changes
Your Questions Answered

Watch  Download slides


In accordance with Volume 1, Module 3, Section 5 of the General Requirements for Participation in the TNI SSAS program restricting subcontracting of the analysis of the audit sample, if you choose to send your samples to a laboratory different than that specified when the order is placed, Waters ERA is required to notify your regulator. This may delay receipt of your report as your regulator will determine if the report is acceptable or not acceptable, and if further actions are required.


 

Downloads

As the first TNI-accredited audit sample provider, Waters ERA is ready to help you navigate the program’s new requirements. We have the audit samples you need to ensure regulatory compliance. Download a PDF of sample order form, fill it out, save a copy, and then fax or attach to an email.

Email: info@eraqc.com
Fax: 303-421-0159

Contents

Two ways to order stationary source audit samples from Waters ERA:


Fax Download and complete the order form. Fax it to
303-421-0159 or email to info@eraqc.com
Call
Call 800-372-0122

Links

 

Available Audit Samples

Metals Standards
Cat # Product Name EPA Method Description Analytes  Concentration
1425 Metals on Filter Paper 29 One filter paper ready for use with EPA method 29 containing metals listed at concentration ranging from 10-350 µg/filter. Antimony, Arsenic, Barium, Beryllium, Cadmium, Chromium, Cobalt, Copper, Lead, Manganese, Nickel, Selenium, Silver, Thallium, Zinc 10-350 µg/filter
1426 Metals in Impinger Solution 29 One impinger solution sample for use with EPA method 29 containing metals listed at 0.10-30 μg/mL after dilution. Antimony, Arsenic, Barium, Beryllium, Cadmium, Chromium, Cobalt, Copper, Lead, Manganese, Nickel, Selenium, Silver, Thallium, Zinc 0.10-30 μg/mL after dilution
1427 Mercury on Filter Paper 29 One filter paper sample ready for use with EPA method 29 containing Mercury at 1.0-75 μg/filter. Mercury 1.0-75 μg/filter
1428 Mercury in Impinger Solution 29 and 101A One impinger solution sample for use with EPA methods 29 and 101a containing Mercury at 0.9-200 ng/mL after dilution. Mercury 0.9-200 ng/mL after dilution
1429 Lead on Filter Paper 12 One filter paper sample ready for use with EPA method 12 containing Lead at 20-350 μg/filter. Lead 20-350 μg/filter
1430 Lead in Impinger Solution 12 One impinger solution sample for use with EPA method 12 containing Lead at 0.2-120 μg/mL after dilution. Lead 0.2-120 μg/mL after dilution

Inorganic Standards
1440 Hydrogen Halides 26 and 26A One impinger solution sample for use with EPA methods 26 and 26A containing 5.0-500 mg/L Hydrogen Chloride, Hydrogen Fluoride 5.0-500 mg/L after dilution
1441 Flouride in Impinger Solution 13A and 13B
One impinger solution sample for use with EPA methods 13a and 13b containing Fluoride at 1–50 mg/dscm after dilution. Fluoride 1–50 mg/dscm after dilution
1442 Nitrogen Oxide in Impinger Solution 7 One impinger solution sample for use with EPA method 7 containing oxides of nitrogen at 100-2000 mg/dscm after dilution. Oxides of nitrogen 100-2000 mg/dscm after dilution
1443 Sulfur Dioxide in Impinger Solution 6 and 8
 		One impinger solution sample for use with EPA methods 6 and 8 containing Sulfur Dioxide at 50-2000 mg/dscm after dilution. Sulfur dioxide 50-2000 mg/dscm after dilution
1444 Sulfuric Acid & Sulfur Dioxide in Impinger Solution 8 One impinger solution sample for use with EPA method 8 containing Sulfuric Acid at 5-150 mg/dscm after dilution. Sulfuric Acid 5-150 mg/dscm after dilution
 

Request a PDF of webinar slides